Đo áp suất
품목 코드: QPL25.050
- 단위
- Cái
콘텐츠 불러오는 중…
콘텐츠 불러오는 중…
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
Module ngõ vào tương tự SIEMENS 6ES7134-6GD00-0BA1. General information / Tên kiểu sản phẩm: AI 4xI 2-/4-wire ST; General information / Firmware version: V1.1; General information / FW update possible: Yes.
품목 코드
6ES7134-6GD00-0BA1
단위
Chưa cập nhật
공급 상태
견적 문의
필요 수량 (Chưa cập nhật)
온라인 결제는 필요하지 않습니다. TESFA가 품번, 수량, 공급 조건을 확인한 뒤 입력하신 연락처로 견적을 회신합니다.
MRO 품목은 이미지보다 정확한 코드 확인이 더 중요합니다. TESFA는 견적 확정 전에 핵심 기술 항목을 확인합니다.
| 속성 | 제품 사양 |
|---|---|
| Mã sản phẩm | 6ES7134-6GD00-0BA1 |
| Tên gọi chính hãng | *** Spare part *** SIMATIC ET 200SP, analog input module, AI 4XI 2-/4-wire standard, suitable for BU type A0, A1, Color code CC03, Module diagnostics, 16 bit, +/-0.3% |
| General information / Tên kiểu sản phẩm | AI 4xI 2-/4-wire ST |
| General information / Firmware version | V1.1 |
| General information / FW update possible | Yes |
| General information / usable BaseUnits | BU type A0, A1 |
| General information / Color code for module-specific color-coded label | CC03 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Product function / Isochronous mode | No |
| General information / Product function / Measuring range scalable | No |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V11 SP2 / V13 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| General information / Engineering with / PCS 7 configurable/integrated from version | V8.1 SP1 |
| General information / Engineering with / PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
| General information / Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.3 |
| General information / Operating mode / Oversampling | No |
| General information / Operating mode / MSI | No |
| CiR - Configuration in RUN / Reparameterization possible in RUN | Yes |
| CiR - Configuration in RUN / Calibration possible in RUN | No |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Input current / Current consumption, max. | 37 mA; without sensor supply |
| Encoder supply / 24 V encoder supply / 24 V | Yes |
| Encoder supply / 24 V encoder supply / Short-circuit protection | Yes |
| Encoder supply / 24 V encoder supply / Output current, max. | 20 mA; max. 50 mA per channel for a duration < 10 s |
| Power loss / Power loss, typ. | 0.85 W; Without encoder supply voltage |
| Address area / Address space per module / Address space per module, max. | 8 byte; + 1 byte for QI information |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Mechanical coding element | Yes |
| Hardware configuration / Type of mechanical coding element | Type A |
| Analog inputs / Số ngõ vào tương tự | 4; Differential inputs |
| Analog inputs / For current measurement | 4 |
| Analog inputs / permissible input current for current input (destruction limit), max. | 50 mA |
| Cycle time (all channels), min. | Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels) |
| Input ranges (rated values), currents / 0 to 20 mA | Yes |
| Input ranges (rated values), currents / Input resistance (0 to 20 mA) | 100 Ω; + approx. 0.7 V diode forward voltage in 2-wire operation |
| Input ranges (rated values), currents / -20 mA to +20 mA | Yes |
| Input ranges (rated values), currents / Input resistance (-20 mA to +20 mA) | 100 Ω |
| Input ranges (rated values), currents / 4 mA to 20 mA | Yes |
| Input ranges (rated values), currents / Input resistance (4 mA to 20 mA) | 100 Ω; + approx. 0.7 V diode forward voltage in 2-wire operation |
| Cable length / shielded, max. | 1 000 m |
| Analog value generation for the inputs / Measurement principle | integrating (Sigma-Delta) |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max. | 16 bit |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Integration time, parameterizable | Yes |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz |
| Analog value generation for the inputs / Integration and conversion time/resolution per channel / Conversion time (per channel) | 180 / 60 / 50 ms |
| Analog value generation for the inputs / Smoothing of measured values / Number of smoothing levels | 4; None; 4/8/16 times |
| Analog value generation for the inputs / Smoothing of measured values / parameterizable | Yes |
| Encoder / Connection of signal encoders / for voltage measurement | No |
| Encoder / Connection of signal encoders / for current measurement as 2-wire transducer | Yes |
| Encoder / Connection of signal encoders / Burden of 2-wire transmitter, max. | 650 Ω |
| Encoder / Connection of signal encoders / for current measurement as 4-wire transducer | Yes |
| Errors/accuracies / Linearity error (relative to input range), (+/-) | 0.01 % |
| Errors/accuracies / Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Errors/accuracies / Crosstalk between the inputs, min. | 50 dB; Applies to up to ±5 V overvoltage in other channels |
| Errors/accuracies / Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
| Errors/accuracies / Operational error limit in overall temperature range / Current, relative to input range, (+/-) | 0.5 % |
| Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to input range, (+/-) | 0.3 % |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Series mode interference (peak value of interference < rated value of input range), min. | 70 dB |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Common mode voltage, max. | 10 V |
| Errors/accuracies / Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency / Common mode interference, min. | 90 dB |
| Interrupts/diagnostics/status information / Diagnostics function | Yes |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Limit value alarm | No |
| Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Wire break | Yes; at 4 to 20 mA |
| Interrupts/diagnostics/status information / Diagnoses / Short-circuit | Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply |
| Interrupts/diagnostics/status information / Diagnoses / Group error | Yes |
| Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow | Yes |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red LED |
| Potential separation / Potential separation channels / between the channels | Yes; channel group-specific between 2-wire current input group and 4-wire voltage input group |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | Yes; only for 4-wire transducer |
| Permissible potential difference / between the inputs (UCM) | 10 V DC |
| Isolation / Isolation tested with | 707 V DC (type test) |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 31 g |
품목 코드: QPL25.050
품목 코드: QPL25.500B
품목 코드: SQM45.295B9
품목 코드: 3RA2816-0EW20
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
