Name: Module ngõ ra tương tự SIEMENS 6ES7532-5NB00-0AB0
Brand: Siemens
SKU: 6ES7532-5NB00-0AB0

Mã hàng

Đơn vị tính

Tình trạng cung ứng

Số lượng cần mua

Không cần thanh toán online. TESFA sẽ kiểm tra mã hàng, số lượng, điều kiện cung cấp và phản hồi báo giá theo thông tin liên hệ của bạn.

TESFA kiểm tra gì trước khi báo giá?

Với vật tư MRO, chọn đúng mã quan trọng hơn chọn theo ảnh. TESFA sẽ đối chiếu các điểm kỹ thuật chính trước khi xác nhận báo giá.

Thông số kỹ thuật

Mô tả & ứng dụng

Lưu ý báo giá

Thông số kỹ thuật

Đang tải nội dung…

Thuộc tính

Thông số sản phẩm

Mã sản phẩm

6ES7532-5NB00-0AB0

Tên gọi chính hãng

SIMATIC S7-1500/ET 200MP, analog output module, AQ 2xU/I ST (25 mm); 16-bit resolution; accuracy 0.3%; 2 channels in in a group; diagnostics; substitute value; safety-oriented switching off of load groups up to SIL 2 according to EN IEC 62061:2021 and category 2/PL c according to EN ISO 13849-1:2015; including U-connector, complete infeed and shielding set and push-in front connector

General information / Tên kiểu sản phẩm

AQ 2xU/I ST

General information / HW functional status

FS01

General information / Firmware version

V1.0.0

General information / FW update possible

Yes

General information / Product function / I&M data

Yes; I&M0 to I&M3

General information / Product function / Isochronous mode

General information / Product function / Prioritized startup

General information / Product function / Output range scalable

General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version

V13 / V13.0.2

General information / Engineering with / STEP 7 configurable/integrated from version

V5.5 SP3 / -

General information / Engineering with / PROFIBUS from GSD version/GSD revision

V1.0 / V5.1

General information / Engineering with / PROFINET from GSD version/GSD revision

V2.3 / -

General information / Operating mode / Oversampling

General information / Operating mode / MSO

Yes

CiR - Configuration in RUN / Reparameterization possible in RUN

Yes

CiR - Configuration in RUN / Calibration possible in RUN

Yes

Supply voltage / Rated value (DC)

24 V

Supply voltage / permissible range, lower limit (DC)

20.4 V

Supply voltage / permissible range, upper limit (DC)

28.8 V

Supply voltage / Reverse polarity protection

Yes

Input current / Current consumption, max.

110 mA; with 24 V DC supply

Power / Power consumption from the backplane bus

0.65 W

Power loss / Power loss, typ.

2.7 W

Analog outputs / Số ngõ ra tương tự

Analog outputs / Voltage output, short-circuit protection

Yes

Analog outputs / Voltage output, short-circuit current, max.

24 mA

Current output, no-load voltage, max.

22 V

Cycle time (all channels), min.

3.2 ms; independent of number of activated channels

Output ranges, voltage / 0 to 10 V

Yes

Output ranges, voltage / 1 V to 5 V

Yes

Output ranges, voltage / -5 V to +5 V

Output ranges, voltage / -10 V to +10 V

Yes

Output ranges, current / 0 to 20 mA

Yes

Output ranges, current / -20 mA to +20 mA

Yes

Output ranges, current / 4 mA to 20 mA

Yes

Connection of actuators / for voltage output two-wire connection

Yes

Connection of actuators / for voltage output four-wire connection

Yes

Connection of actuators / for current output two-wire connection

Yes

Load impedance (in rated range of output) / with voltage outputs, min.

1 k Ω; 0.5 kOhm at 1 to 5 V

Load impedance (in rated range of output) / with voltage outputs, capacitive load, max.

1 μF

Load impedance (in rated range of output) / with current outputs, max.

750 Ω

Load impedance (in rated range of output) / with current outputs, inductive load, max.

10 mH

Cable length / shielded, max.

800 m; for current, 200 m for voltage

Analog value generation for the outputs / Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max.

16 bit

Analog value generation for the outputs / Integration and conversion time/resolution per channel / Conversion time (per channel)

0.5 ms

Analog value generation for the outputs / Settling time / for resistive load

1.5 ms

Analog value generation for the outputs / Settling time / for capacitive load

2.5 ms

Analog value generation for the outputs / Settling time / for inductive load

2.5 ms

Errors/accuracies / Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)

0.02 %

Errors/accuracies / Linearity error (relative to output range), (+/-)

0.15 %

Errors/accuracies / Temperature error (relative to output range), (+/-)

0.002 %/K

Errors/accuracies / Crosstalk between the outputs, max.

-100 dB

Errors/accuracies / Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)

0.05 %

Errors/accuracies / Operational error limit in overall temperature range / Voltage, relative to output range, (+/-)

0.3 %

Errors/accuracies / Operational error limit in overall temperature range / Current, relative to output range, (+/-)

0.3 %

Errors/accuracies / Basic error limit (operational limit at 25 °C) / Voltage, relative to output range, (+/-)

0.2 %

Errors/accuracies / Basic error limit (operational limit at 25 °C) / Current, relative to output range, (+/-)

0.2 %

Interrupts/diagnostics/status information / Diagnostics function

Yes

Interrupts/diagnostics/status information / Substitute values connectable

Yes

Interrupts/diagnostics/status information / Alarms / Diagnostic alarm

Yes

Interrupts/diagnostics/status information / Diagnoses / Monitoring the supply voltage

Yes

Interrupts/diagnostics/status information / Diagnoses / Wire break

Yes; Only for output type "current"

Interrupts/diagnostics/status information / Diagnoses / Short-circuit

Yes; Only for output type "voltage"

Interrupts/diagnostics/status information / Diagnoses / Overflow/Underflow

Yes

Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED

Yes; green LED

Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED

Yes; red LED

Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED)

Yes; green LED

Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display

Yes; green LED

for channel diagnostics

Yes; red LED

for module diagnostics

Yes; red LED

Potential separation / Potential separation channels / between the channels

Potential separation / Potential separation channels / between the channels, in groups of

Potential separation / Potential separation channels / between the channels and backplane bus

Yes

Potential separation / Potential separation channels / Between the channels and load voltage L+

Yes

Permissible potential difference / between S- and MANA (UCM)

8 V DC

Isolation / Isolation tested with

707 V DC (type test)

Security / signed firmware update

Security / data integrity

Ambient conditions / Ambient temperature during operation / horizontal installation, min.

0 °C

Ambient conditions / Ambient temperature during operation / horizontal installation, max.

60 °C

Ambient conditions / Ambient temperature during operation / vertical installation, min.

0 °C

Ambient conditions / Ambient temperature during operation / vertical installation, max.

40 °C

Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max.

5 000 m; Restrictions for installation altitudes > 2 000 m, see manual

Dimensions / Chiều rộng

25 mm

Dimensions / Chiều cao

147 mm

Dimensions / Chiều sâu

129 mm

Weights / Khối lượng xấp xỉ

200 g

Other / Note:

Supplied incl. 40-pole push-in front connectors

TESFA kiểm tra gì trước khi báo giá?

Thông số kỹ thuật

TESFA kiểm tra gì trước khi báo giá?

Thông số kỹ thuật

Module ngõ ra tương tự SIEMENS 6ES7532-5NB00-0AB0

Sản phẩm liên quan

Kiến thức kỹ thuật

TESFA kiểm tra gì trước khi báo giá?

Thông số kỹ thuật

TESFA kiểm tra gì trước khi báo giá?

Thông số kỹ thuật

Module ngõ ra tương tự SIEMENS 6ES7532-5NB00-0AB0

Chi tiết sản phẩm

Sản phẩm liên quan

Kiến thức kỹ thuật