Item code: ACS880-01-293A-3
- Unit
- Chưa cập nhật
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.

Aptomat bảo vệ động cơ ABB MS132-10. Product Net Width: 45 mm; Product Net Height: 90 mm.
Item code
MS132-10
Unit
Chưa cập nhật
Supply status
Liên hệ báo giá
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | MS132-10 |
| Mã định danh ABB | 1SAM350000R1010 |
| Model ABB | MS132-10 |
| Product Net Width | 45 mm |
| Product Net Height | 90 mm |
| Product Net Depth / Length | 86.75 mm |
| Product Net Weight | 0.265 kg |
| Rated Service Short-Circuit Breaking Capacity (I cs ) | (230 V AC) 100 kA; (250 V DC) 3 Poles in Series 10 kA; (400 V AC) 100 kA; (440 V AC) 30 kA; (500 V AC) 20 kA; (690 V AC) 3 kA |
| Rated Ultimate Short-Circuit Breaking Capacity (I cu ) | (230 V AC) 100 kA; (400 V AC) 100 kA; (440 V AC) 30 kA; (500 V AC) 20 kA; (690 V AC) 3 kA |
| Rated Instantaneous Short-Circuit Current Setting (I i ) | 150 A |
| Setting Range | 6.3 ... 10 A |
| Rated Operational Power AC-3 (P e ) | (400 V) Three Phase 4 kW |
| Rated Operational Power AC-3e (P e ) | (400 V) Three Phase 4 kW |
| Rated Operational Voltage | Main Circuit 690 V AC; Main Circuit 250 V DC |
| Rated Operational Current (I e ) | 10 A |
| Rated Operational Current AC-3 (I e ) | 10 A |
| Rated Operational Current AC-3e (I e ) | 10 A |
| Rated Operational Current DC-5 (I e ) | 10 A |
| Rated Frequency (f) | Main Circuit 50 Hz; Main Circuit 60 Hz |
| Operating Frequency (f sw ) | 0 ... 400 Hz |
| Rated Impulse Withstand Voltage (U imp ) | Main Circuit 6 kV |
| Rated Insulation Voltage (U i ) | 690 V |
| Power Loss | at Rated Operating Conditions AC-3 per Pole 2 W |
| Number of Poles | 3P |
| Conventional Free-air Thermal Current (I th ) | Main Circuit 10 A |
| Degree of Protection | Housing IP20; Main Circuit Terminals IP10 |
| Pollution Degree | 3 |
| Electrical Durability | 50000 cycle |
| Mechanical Durability | Nr. Operations 100000 cycle |
| Terminal Type | Screw Terminals |
| Connecting Capacity Main Circuit | Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²; Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²; Flexible 1/2x 0.75 ... 2.5 mm²; Rigid 1/2x 1 ... 4 mm² |
| Tightening Torque | Main Circuit 0.8 ... 1.2 N·m |
| Wire Stripping Length | Auxiliary Circuit 8 mm; Main Circuit 9 mm |
| Recommended Screw Driver | Pozidriv 2 |
| Mounting Position | 1 ... 6 |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715; TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Minimum Mounting Distance | Electrical Conductive Board, Horizontal - Up to 400 V 0 mm; Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm; Electrical Conductive Board, Vertical 75 mm; Other Device Same Type, Horizontal 0 mm; Other Device Same Type, Vertical 150 mm |
| Contact Position Indication | ON / OFF / TRIP |
| Standards | IEC/EN 60947-1; IEC/EN 60947-2; IEC/EN 60947-4-1; UL 60947-1; UL 60947-4-1; IEC 60335-2-40 A2L |
| Remarks | UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx |
| Short-Circuit Current Rating (SCCR) UL/CSA | Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA; Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 18 kA; Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA; Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 35 kA; Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA; Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 18 kA; Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA; Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 18 kA |
| Maximum Operating Voltage UL/CSA | Main Circuit 600 V AC |
| Horsepower Rating UL/CSA | (200 V AC) Three Phase 2 Hp; (208 V AC) Three Phase 2 Hp; (220 ... 240 V AC) Three Phase 3 Hp; (440 ... 480 V AC) Three Phase 5 Hp; (550 ... 600 V AC) Three Phase 7.5 Hp |
| Full Load Amps Motor Use | (200 V AC) Three Phase 7.8 A; (208 V AC) Three Phase 7.5 A; (220 ... 240 V AC) Three Phase 9.6 A; (440 ... 480 V AC) Three Phase 7.6 A; (550 ... 600 V AC) Three Phase 9 A |
| Locked Rotor Amps | (200 V AC) Three Phase 57.5 A; (208 V AC) Three Phase 55 A; (220 ... 240 V AC) Three Phase 64 A; (440 ... 480 V AC) Three Phase 46 A; (550 ... 600 V AC) Three Phase 50.8 A |
| General Use Rating UL/CSA | (600 V AC) 10 A |
| Connecting Capacity Main Circuit UL/CSA | Flexible 1/2x 16-12 AWG; Stranded 1/2x 16-12 AWG |
| Tightening Torque UL/CSA | Main Circuit 10 ... 12 in·lb |
| Ambient Air Temperature | Around the Enclosure 0 ... +40 °C; Operation -25 ... +70 °C; Operation Compensated -25 ... +60 °C; Storage -50 ... +80 °C |
| Ambient Air Temperature Compensation | Yes |
| Maximum Operating Altitude Permissible | 2000 m |
| Resistance to Shock acc. to IEC 60068-2-27 | 11 ms Pulse 25g |
| Resistance to Vibrations | 5g 3 ... 150 Hz |
Item code: ACS880-01-293A-3
Item code: ACS880-01-032A-3
Item code: ACS880-01-072A-3
Item code: ACS880-01-045A-3
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.