Relay
Item code: LRD21
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Rơ le giám sát nhiệt độ ABB 1SVR730740R9200. Product Net Width: 22.5 mm; Product Net Height: 85.6 mm.
Item code
1SVR730740R9200
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | 1SVR730740R9200 |
| Hãng sản xuất | ABB |
| Mã định danh ABB | 1SVR730740R9200 |
| Mã hàng theo CRM | 1SVR 730 740 R9200 |
| Model ABB | CM-TCS.22S |
| Nhóm sản phẩm | Rơ le |
| Ghi chú xác minh | Thông tin được lấy từ dữ liệu CRM hiện có; TESFA sẽ đối chiếu lại mã hàng/cấu hình trước khi báo giá. |
| Product Net Width | 22.5 mm |
| Product Net Height | 85.6 mm |
| Product Net Depth / Length | 103.7 mm |
| Product Net Weight | 0.138 kg |
| Function | Overtemperature monitoring; Undertemperature monitoring; Over- and undertemperature monitoring |
| Measuring Range | 0 ... 100 °C |
| Sensor Type | PT100 |
| Rated Control Supply Voltage (U s ) | 24 V AC/DC |
| Rated Frequency (f) | Supply Circuit 50 Hz; Supply Circuit 60 Hz; Supply Circuit DC |
| Output | 2x 1 C/O or 1x 2 C/O Contact, Configurable |
| Terminal Type | Screw Terminals |
| Rated Operational Current AC-12 (I e ) | (230 V) 4 A |
| Rated Operational Current AC-15 (I e ) | (230 V) 3 A |
| Rated Operational Current DC-12 (I e ) | (24 V) 4 A |
| Rated Operational Current DC-13 (I e ) | (24 V) 2 A |
| Minimum Switching Capacity | 24 V; 10 mA |
| Rated Impulse Withstand Voltage (U imp ) | Measuring Circuit / Output Circuit 4 kV; Output Circuit 1 / Output Circuit 2 4 kV; Supply Circuit / Measuring Circuit 4 kV; Supply Circuit / Output Circuit 4 kV |
| Rated Insulation Voltage (U i ) | Measuring Circuit / Output Circuit 300 V; Output Circuit 1 / Output Circuit 2 300 V; Supply Circuit / Measuring Circuit 300 V; Supply Circuit / Output Circuit 300 V |
| Degree of Protection | Housing IP50; Terminals IP20 |
| Overvoltage Category | III |
| Pollution Degree | 3 |
| Short-Circuit Protective Devices | Output Circuit NC - F Type Fuses 6 A; Output Circuit NO - F Type Fuses 10 A |
| Electrical Durability | AC-12 100000 cycle |
| Mechanical Durability | Nr. Operations 30000000 cycle |
| Connecting Capacity | Flexible with Ferrule 1x 0.5 ... 2.5 mm²; Flexible with Ferrule 2x 0.5 ... 1.5 mm²; Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²; Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²; Flexible 1x 0.5 ... 2.5 mm²; Flexible 2x 0.5 ... 1.5 mm²; Rigid 1x 0.5 ... 4 mm²; Rigid 2x 0.5 ... 2.5 mm² |
| Tightening Torque | 0.6 ... 0.8 N·m |
| Wire Stripping Length | 8 mm |
| Recommended Screw Driver | 0.8 x 4; 4.5; Pozidriv 1 |
| Mounting Position | 1 ... 6 |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715; TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Standards | CAN/CSA C22.2 No.60947-5-1; IEC/EN 60255-26; IEC/EN 60255-27; IEC/EN 61000-6-2; IEC/EN 61000-6-3; IEC/EN 63000; UL 60947-5-1; IEC/EN 60947-5-1 |
| Maximum Operating Voltage UL/CSA | Output Circuit 300 V AC |
| Contact Rating UL/CSA | B300 |
| Connecting Capacity UL/CSA | Flexible 1x 18-14 AWG; Flexible 2x 18-16 AWG; Rigid 1x 20-12 AWG; Rigid 2x 20-14 AWG |
| Tightening Torque UL/CSA | 7.08 in·lb |
| Pilot Duty UL/CSA | B300 |
| Ambient Air Temperature | Operation -40 ... +60 °C; Storage -40 ... +85 °C |
| Maximum Operating Altitude Permissible | Without Derating 2000 m |
Item code: LRD21
Item code: RXM4AB2B7
Item code: RXZE1M2C
Item code: LRD16
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
Phân biệt ren G, R, NPT theo hình dạng, tài liệu và cơ chế làm kín. Có ảnh minh họa, quy trình nhận diện và checklist đặt đầu nối.
