Chưa cập nhật
Item code: ACS880-01-293A-3
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Rơ le ABB CM-MSS.23S. Product Net Width: 22.5 mm; Product Net Height: 85.6 mm.
Item code
CM-MSS.23S
Unit
Chưa cập nhật
Supply status
Liên hệ báo giá
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | CM-MSS.23S |
| Mã định danh ABB | 1SVR730700R2200 |
| Model ABB | CM-MSS.23S |
| Product Net Width | 22.5 mm |
| Product Net Height | 85.6 mm |
| Product Net Depth / Length | 103.7 mm |
| Product Net Weight | 0.174 kg |
| Function | 1 sensor circuit; Auto; manual or remote reset |
| Rated Control Supply Voltage (U s ) | 110 ... 130 V AC; 220 ... 240 V AC |
| Rated Operational Voltage | Auxiliary Circuit 250 V AC |
| Rated Frequency (f) | Supply Circuit 50/60 Hz |
| Output | 2 C/O Contacts |
| Terminal Type | Screw Terminals |
| Rated Operational Current AC-12 (I e ) | (230 V) 4 A |
| Rated Operational Current AC-15 (I e ) | (230 V) 3 A |
| Rated Operational Current DC-12 (I e ) | (24 V) 4 A |
| Rated Operational Current DC-13 (I e ) | (24 V) 2 A |
| Minimum Switching Capacity | 24 V; 10 mA |
| Rated Impulse Withstand Voltage (U imp ) | Output Circuit 1 / Output Circuit 2 4 kV; Output Circuit 4 kV |
| Rated Insulation Voltage (U i ) | Measuring Circuit / Output Circuit 300 V; Output Circuit 1 / Output Circuit 2 300 V; Supply Circuit / Measuring Circuit 300 V; Supply Circuit / Output Circuit 300 V |
| Degree of Protection | Housing IP50; Terminals IP20 |
| Overvoltage Category | III |
| Pollution Degree | 3 |
| Short-Circuit Protective Devices | Output Circuit NC - F Type Fuses 10 A; Output Circuit NO - F Type Fuses 10 A |
| Electrical Durability | AC-12 100000 cycle |
| Mechanical Durability | Nr. Operations 30000000 cycle |
| Connecting Capacity | Flexible 1x 0.5 ... 2.5 mm²; Flexible 2x 0.5 ... 1.5 mm²; Rigid 1x 0.5 ... 4 mm²; Rigid 2x 0.5 ... 2.5 mm² |
| Tightening Torque | 0.6 ... 0.8 N·m; Auxiliary Circuit 1 ... 1.2 N·m; Main Circuit 2.5 ... 2.7 N·m |
| Wire Stripping Length | 8 mm; Auxiliary Circuit 9 mm; Main Circuit 12 mm |
| Recommended Screw Driver | 0.8 x 4; 4.5; Pozidriv 1 |
| Mounting Position | 1 ... 6 |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715; TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Standards | CAN/CSA C22.2 No.14; IEC/EN 63000; IEC/EN 60947-5-1; IEC/EN 60947-8; UL 508 |
| Maximum Operating Voltage UL/CSA | Output Circuit 300 V AC |
| Contact Rating UL/CSA | (NC:) Q600; (NO:) Q600; (NC:) B600; (NO:) D300; B300 |
| Connecting Capacity UL/CSA | Flexible 1x 18-14 AWG; Flexible 2x 18-16 AWG; Rigid 1x 20-12 AWG; Rigid 2x 20-14 AWG |
| Tightening Torque UL/CSA | 7.08 in·lb |
| Connecting Capacity Main Circuit UL/CSA | Flexible 1/2x 18-10 AWG |
| Connecting Capacity Auxiliary Circuit UL/CSA | Flexible 1/2x 18-12 AWG |
| Pilot Duty UL/CSA | B300; NC B600; NC Q600; NO D300; NO Q600 |
| Flammability According to UL94 | V-0 |
| Ambient Air Temperature | Operation -25 ... +60 °C; Storage -40 ... +85 °C |
| Maximum Operating Altitude Permissible | Without Derating 2000 m |
Item code: ACS880-01-293A-3
Item code: ACS880-01-032A-3
Item code: ACS880-01-072A-3
Item code: ACS880-01-045A-3
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
