Chưa cập nhật
Item code: 3RA2816-0EW20
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Bộ nguồn công nghiệp SIEMENS 6EP1334-2BA20. General information / Technical Product Detail Page: https://i.siemens.com/1P6EP1334-2BA20; General information / product brand name: SITOP; General information / product type designation: PSU100S.
Item code
6EP1334-2BA20
Unit
Chưa cập nhật
Supply status
Liên hệ báo giá
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | 6EP1334-2BA20 |
| Tên gọi chính hãng | SITOP PSU100S 24 V/10 A stabilized power supply input: 120/230 V AC output: 24 V DC/10 A |
| General information / Technical Product Detail Page | https://i.siemens.com/1P6EP1334-2BA20 |
| General information / product brand name | SITOP |
| General information / product type designation | PSU100S |
| General information / product designation | Power supply SITOP smart |
| General information / type of current supply | 24 V/10 A |
| input / type of the power supply network | 1-phase AC |
| input / phase number | 1 |
| input / voltage curve at input | AC |
| input / supply voltage at AC | Automatic range selection |
| input / supply voltage | 120 V/230 V |
| input / input voltage 1 at AC | 85 ... 132 V |
| input / input voltage 2 at AC | 170 ... 264 V |
| input / supply voltage / at 50 Hz | 230 V |
| input / supply voltage / at 60 Hz | 120 V |
| input / line frequency | 50/60 Hz; 47 ... 63 Hz |
| input / wide range input | No |
| input / overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| input / buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| input / operating condition of the mains buffering | at Vin = 93/187 V |
| input / input current / at rated input voltage 120 V | 4.49 A |
| input / input current / at rated input voltage 230 V | 1.91 A |
| input / current limitation of inrush current at 25 °C maximum | 60 A |
| input / I2t value maximum | 5.6 A²·s |
| input / fuse protection type | T 6.3 A/250 V (not accessible) |
| input / fuse protection type in the feeder | Recommended miniature circuit breaker: from 10 A characteristic C |
| output / voltage curve at output | Controlled, isolated DC voltage |
| output / product function output voltage controlled | Yes |
| output / product function output voltage stabilized | Yes |
| output / output voltage at DC rated value | 24 V |
| output / output voltage / at output 1 at DC rated value | 24 V |
| at output 1 at DC | 24 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 22.8 ... 28 V |
| relative overall tolerance of the voltage | 3 % |
| relative control precision of the output voltage / on slow fluctuation of input voltage | 0.1 % |
| relative control precision of the output voltage / on slow fluctuation of ohm loading | 1 % |
| residual ripple / maximum | 150 mV |
| residual ripple / typical | 20 mV |
| voltage peak / maximum | 240 mV |
| voltage peak / typical | 160 mV |
| display version for normal operation | Green LED for 24 V OK |
| type of signal at output | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK" |
| behavior of the output voltage when switching on | Overshoot of Vout < 3 % |
| response delay maximum | 0.3 s |
| voltage increase time of the output voltage / typical | 20 ms |
| output current / rated value | 10 A |
| output current / rated range | 0 ... 12 A; 12 A up to +45°C; +60 ... +70 °C: Derating 3%/K |
| supplied active power typical | 288 W |
| short-term overload current / on short-circuiting during the start-up typical | 32 A |
| short-term overload current / at short-circuit during operation typical | 32 A |
| duration of overloading capability for excess current / on short-circuiting during the start-up | 1 000 ms |
| duration of overloading capability for excess current / at short-circuit during operation | 1 000 ms |
| bridging of equipment | Yes |
| number of parallel-switched equipment resources for increasing the power | 2 |
| efficiency / efficiency in percent | 90 % |
| efficiency / power loss [W] / at rated output voltage for rated value of the output current typical | 25 W |
| closed-loop control / relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.3 % |
| closed-loop control / relative control precision of the output voltage at load step of resistive load 10/90/10 % typical | 3 % |
| closed-loop control / setting time / load step 10 to 90% typical | 1 ms |
| closed-loop control / setting time / load step 90 to 10% typical | 1 ms |
| protection and monitoring / design of the overvoltage protection | protection against overvoltage in case of internal fault Vout < 33 V |
| protection and monitoring / property of the output short-circuit proof | Yes |
| protection and monitoring / design of short-circuit protection | Constant current characteristic |
| protection and monitoring / response value current limitation | 12 ... 14.6 A |
| protection and monitoring / overcurrent overload capability / in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| protection and monitoring / enduring short circuit current RMS value / typical | 14.6 A |
| safety / galvanic isolation between input and output | Yes |
| safety / galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| safety / operating resource protection class | Class I |
| safety / leakage current / maximum | 3.5 mA |
| typical | 0.8 mA |
| protection class IP | IP20 |
| EMC / standard / for emitted interference | EN 55022 Class B |
| EMC / standard / for mains harmonics limitation | EN 61000-3-2 |
| EMC / standard / for interference immunity | EN 61000-6-2 |
| ambient conditions / ambient temperature / during operation | -25 ... +70 °C; with natural convection |
| ambient conditions / ambient temperature / during transport | -40 ... +85 °C |
| ambient conditions / ambient temperature / during storage | -40 ... +85 °C |
| ambient conditions / environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
| connection method / type of electrical connection | screw terminal |
| connection method / at input | L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded |
| connection method / at output | +, -: 2 screw terminals each for 0.5 ... 2.5 mm² |
| connection method / for auxiliary contacts | Alarm signals: 2 screw terminals for 0.5 ... 2.5 mm² |
| connection method / for signaling contact | 2 screw terminals for 0.5 ... 2.5 mm² |
| mechanical data / width × height × depth of the enclosure | 70 × 125 × 120 mm |
| mechanical data / installation width × mounting height | 70 mm × 225 mm |
| mechanical data / required spacing / top | 50 mm |
| mechanical data / required spacing / bottom | 50 mm |
| mechanical data / required spacing / left | 0 mm |
| mechanical data / required spacing / right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.8 kg |
| accessories / electrical accessories | Buffer module |
| accessories / mechanical accessories | Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20 |
| further information internet links / internet link / to website: Industry Mall | https://mall.industry.siemens.com |
| further information internet links / internet link / to web page: selection aid TIA Selection Tool | https://www.siemens.com/tstcloud |
Item code: 3RA2816-0EW20
Item code: 3RT2035-1NB30
Item code: 6MF2805-0AA00
Item code: 6ES7440-1CS00-0YE0
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
