Chưa cập nhật
Item code: 3RA2816-0EW20
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Module ngõ ra số SIEMENS 6ES7136-6DB00-0CA0. General information / Tên kiểu sản phẩm: F-DQ 4x24VDC/2A PM HF; General information / usable BaseUnits: BU type A0; General information / Product function / I&M data: Yes; I&M0 to I&M3.
Item code
6ES7136-6DB00-0CA0
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | 6ES7136-6DB00-0CA0 |
| Tên gọi chính hãng | SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) |
| General information / Tên kiểu sản phẩm | F-DQ 4x24VDC/2A PM HF |
| General information / usable BaseUnits | BU type A0 |
| General information / Product function / I&M data | Yes; I&M0 to I&M3 |
| General information / Engineering with / STEP 7 TIA Portal configurable/integrated from version | V12 |
| General information / Engineering with / STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| General information / Engineering with / PROFINET from GSD version/GSD revision | V2.31 |
| Supply voltage / Rated value (DC) | 24 V |
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Supply voltage / power supply according to NEC Class 2 required | No |
| Input current / Current consumption (rated value) | 75 mA; without load |
| Input current / Current consumption, max. | 21 mA; From the backplane bus |
| Output voltage / Rated value (DC) | 24 V |
| Power / Power consumption from the backplane bus | 70 mW |
| Power loss / Power loss, typ. | 4 W |
| Address area / Address space per module / Inputs | 5 byte |
| Address area / Address space per module / Outputs | 5 byte |
| Hardware configuration / Automatic encoding | Yes |
| Hardware configuration / Electronic coding element type F | Yes |
| Digital outputs / Type of digital output | Transistor |
| Digital outputs / Số ngõ ra số | 4 |
| Digital outputs / Digital outputs, parameterizable | Yes |
| Digital outputs / Short-circuit protection | Yes |
| Digital outputs / Response threshold, typ. | > 3.3 A; 8 mA |
| Digital outputs / Open-circuit detection | Yes |
| Overload protection | Yes |
| Response threshold, typ. | 2.9 A |
| Limitation of inductive shutdown voltage to | Typ. -2x 47 V |
| Controlling a digital input | Yes; digital output, according to IEC 61131-2, type 2 |
| Switching capacity of the outputs / with resistive load, max. | 2 A |
| Switching capacity of the outputs / on lamp load, max. | 10 W |
| Load resistance range / lower limit | 12 Ω |
| Load resistance range / upper limit | 2 000 Ω |
| Output voltage / for signal "1", min. | 24 V; L+ (-0.5 V) |
| Output current / for signal "1" rated value | 2 A |
| Output current / for signal "0" residual current, max. | 0.5 mA |
| Switching frequency / with resistive load, max. | 30 Hz; Symmetrical |
| Switching frequency / with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical |
| Switching frequency / on lamp load, max. | 10 Hz; Symmetrical |
| Total current of the outputs / Current per channel, max. | 2 A; note derating data in the manual |
| Total current of the outputs / Current per module, max. | 6 A; note derating data in the manual |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 500 m |
| Interrupts/diagnostics/status information / Diagnostics function | Yes; See Chapter "Alarms/diagnostic messages" in the manual |
| Interrupts/diagnostics/status information / Substitute values connectable | No |
| Interrupts/diagnostics/status information / Alarms / Diagnostic alarm | Yes |
| Interrupts/diagnostics/status information / Alarms / Hardware interrupt | No |
| Interrupts/diagnostics/status information / Diagnostics indication LED / RUN LED | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / Channel status display | Yes; green LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for channel diagnostics | Yes; red LED |
| Interrupts/diagnostics/status information / Diagnostics indication LED / for module diagnostics | Yes; green/red DIAG LED |
| Potential separation / Potential separation channels / between the channels | No |
| Potential separation / Potential separation channels / between the channels and backplane bus | Yes |
| Potential separation / Potential separation channels / between the channels and the power supply of the electronics | No |
| Isolation / Isolation tested with | 707 V DC (type test) |
| SIL acc. to IEC 61508 | SIL 3 |
| Probability of failure (for service life of 20 years and repair time of 100 hours) / Low demand mode: PFDavg in accordance with SIL2 | < 2.00E-04 |
| Probability of failure (for service life of 20 years and repair time of 100 hours) / Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 |
| Probability of failure (for service life of 20 years and repair time of 100 hours) / High demand/continuous mode: PFH in accordance with SIL2 | < 1.00E-08 1/h |
| Probability of failure (for service life of 20 years and repair time of 100 hours) / High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 1/h |
| Ambient conditions / Ambient temperature during operation / horizontal installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, min. | 0 °C |
| Ambient conditions / Ambient temperature during operation / vertical installation, max. | 50 °C |
| Ambient conditions / Altitude during operation relating to sea level / Installation altitude above sea level, max. | 4 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions / Chiều rộng | 15 mm |
| Dimensions / Chiều cao | 73 mm |
| Dimensions / Chiều sâu | 58 mm |
| Weights / Khối lượng xấp xỉ | 57 g |
Item code: 3RA2816-0EW20
Item code: 3RT2035-1NB30
Item code: DI810
Item code: Q64AD
Quy trình đối chiếu cảm biến thay thế theo cơ khí, điện và chức năng. Có ma trận kiểm tra, ví dụ tình huống và hồ sơ cần gửi để xác minh.
Chọn cáp cảm biến M8/M12 theo đầu đực/cái, số cực, coding, sơ đồ chân và môi trường. Có hình minh họa, bảng kiểm và mẫu yêu cầu báo giá.
Giải thích NO/NC của cảm biến, bảng trạng thái khi có vật và cách phân biệt với PNP/NPN. Checklist kiểm tra trước khi đặt mua hoặc thay thế.
