Nút nhấn & Switch
Item code: XB5AA31
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Biến tần Schneider ATV310HU55N4E. TESFA hỗ trợ đối chiếu mã, thông số điện và báo giá cho nhu cầu MRO công nghiệp.
Item code
ATV310HU55N4E
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã hàng | ATV310HU55N4E |
| Range of product | Easy Altivar 310 |
| Hãng sản xuất | Schneider Electric |
| Product or component type | Variable speed drive |
| Nhóm sản phẩm | Biến tần |
| Product specific application | Simple machine |
| Assembly style | With heat sink |
| Danh mục | Biến tần |
| Device short name | ATV310 |
| Model / mã đặt hàng | ATV310HU55N4E |
| Điện áp | 380 V |
| Network number of phases | Three phase |
| Công suất | 5.5 kW |
| [Us] rated supply voltage | 380...460 V - 15...10 % |
| Motor power kW | 5.5 kW for heavy duty<br />7.5 kW for normal duty |
| Số cực | 3P |
| Chức năng | Điều khiển tốc độ động cơ |
| Motor power hp | 7.5 hp for heavy duty<br />10 hp for normal duty |
| Noise level | 50 dB |
| Ứng dụng | Tủ điện, hệ thống phân phối điện, tự động hóa và MRO nhà máy |
| Đối chiếu trước khi mua | Kiểm tra mã đặt hàng, dòng/áp, số cực, option và ảnh nhãn thiết bị đang dùng |
| Quantity per set | Set of 1 |
| EMC filter | Without EMC filter |
| Nguồn dữ liệu | CRM TESFA; ảnh theo mã/series/nhóm Schneider để hỗ trợ nhận diện ban đầu |
| Type of cooling | Integrated fan |
| Communication port protocol | Modbus |
| Connector type | RJ45 (on front face) for Modbus |
| Physical interface | 2-wire RS 485 for Modbus |
| Transmission frame | RTU for Modbus |
| Transmission rate | 4800 bit/s<br />9600 bit/s<br />19200 bit/s<br />38400 bit/s |
| Number of addresses | 1…247 for Modbus |
| Communication service | Read holding registers (03) 29 words<br />Write single register (06) 29 words<br />Write multiple registers (16) 27 words<br />Read/write multiple registers (23) 4/4 words<br />Read device identification (43) |
| Line current | 21.3 A at 380 V (heavy duty)<br />23.0 A at 380 V (normal duty)<br />14.3 A at 460 V (heavy duty)<br />19.0 A at 460 V (normal duty) |
| Apparent power | 11.4 kVA at 460 V (heavy duty)<br />15.1 kVA at 460 V (normal duty) |
| Prospective line Isc | 22 kA ( heavy duty )<br />5 kA ( normal duty ) |
| Continuous output current | 12.6 A heavy duty<br />16.0 A normal duty |
| Maximum transient current | 18.9 A during 60 s (heavy duty)<br />17.6 A during 60 s (normal duty) |
| Power dissipation in W | 162.4 W, at In (heavy duty)<br />201.9 W, at In (normal duty) |
| Speed drive output frequency | 0.5…400 Hz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...12 kHz adjustable |
| Speed range | 1…20 for asynchronous motor |
| Transient overtorque | 170…200 % of nominal motor torque depending on drive rating and type of motor |
| Braking torque | Up to 150 % of nominal motor torque with braking resistor<br />Up to 70 % of nominal motor torque without braking resistor |
| Asynchronous motor control profile | Voltage/frequency ratio (V/f)<br />Voltage/frequency ratio - Energy Saving, quadratic U/f<br />Sensorless vector control (SVC) |
| Motor slip compensation | Adjustable |
| Output voltage | 380...460 V three phase |
| Electrical connection | Terminal, clamping capacity: 4 mm², 12 AWG (L1, L2, L3, PA/+, PB, U, V, W) |
| Tightening torque | 1.2…1.4 N.m |
| Insulation | Electrical between power and control |
| Supply | Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection<br />Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection |
| Analogue input number | 1 |
| Analogue input type | Configurable current AI1 0...20 mA 250 Ohm<br />Configurable voltage AI1 0...10 V 30 kOhm<br />Configurable voltage AI1 0...5 V 30 kOhm |
| Discrete input number | 4 |
| Discrete input type | Programmable LI1...LI4 24 V 18...30 V |
| Discrete input logic | Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm<br />Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1) |
| Sampling duration | 10 ms for analogue input<br />20 ms, tolerance +/- 1 ms for logic input |
| Linearity error | +/- 0.3 % of maximum value for analogue input |
| Analogue output number | 1 |
| Analogue output type | AO1 software-configurable voltage: 0...10 V AC 0...10 V 0…0.02 A, impedance: 470 Ohm, resolution 8 bits<br />AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits |
| Discrete output number | 2 |
| Discrete output type | Logic output LO+, LO-<br />Protected relay output R1A, R1B, R1C 1 C/O |
| Minimum switching current | 5 mA at 24 V DC for logic relay |
| Maximum switching current | 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay<br />2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay<br />3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay<br />4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
| Acceleration and deceleration ramps | Linear from 0...999.9 s<br />S<br />U |
| Braking to standstill | By DC injection, <30 s |
| Protection type | Line supply overvoltage<br />Line supply undervoltage<br />Overcurrent between output phases and earth<br />Overheating protection<br />Short-circuit between motor phases<br />Against input phase loss in three-phase<br />Thermal motor protection via the drive by continuous calculation of I²t |
| Frequency resolution | Analog input: converter A/D, 10 bits<br />Display unit: 0.1 Hz |
| Time constant | 20 ms +/- 1 ms for reference change |
| Operating position | Vertical +/- 10 degree |
| Height | 184 mm |
| Width | 140 mm |
Item code: XB5AA31
Item code: XB5AA42
Item code: LRD21
Item code: XB5AD33
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
