Nút nhấn & Switch
Item code: XB5AA31
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Biến tần Schneider ATV610D45N4 45kW. TESFA hỗ trợ đối chiếu mã, thông số điện và báo giá cho nhu cầu MRO công nghiệp.
Item code
ATV610D45N4 45kW
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã hàng | ATV610D45N4 45kW |
| Range of product | Altivar ATV610 |
| Hãng sản xuất | Schneider Electric |
| Product specific application | Fan, pump, compressor, conveyor |
| Nhóm sản phẩm | Biến tần |
| Product or component type | Variable speed drive |
| Device short name | ATV610 |
| Model / mã đặt hàng | ATV610D45N4 45kW |
| Công suất | 45 kW |
| Variant | Standard version |
| Chức năng | Điều khiển tốc độ động cơ |
| Product destination | Asynchronous motors<br />Synchronous motors |
| Mounting mode | Cabinet mount |
| Ứng dụng | Tủ điện, hệ thống phân phối điện, tự động hóa và MRO nhà máy |
| Đối chiếu trước khi mua | Kiểm tra mã đặt hàng, dòng/áp, số cực, option và ảnh nhãn thiết bị đang dùng |
| EMC filter | Integrated conforming to IEC 61800-3 category C3 with 50 m |
| IP degree of protection | IP20 |
| Nguồn dữ liệu | CRM TESFA; ảnh theo mã/series/nhóm Schneider để hỗ trợ nhận diện ban đầu |
| Type of cooling | Forced convection |
| Supply frequency | 50...60 Hz +/-5 % |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...460 V - 15...10 % |
| Motor power kW | 45 kW for normal duty<br />37 kW for heavy duty |
| Motor power hp | 60 hp for normal duty<br />50 hp for heavy duty |
| Line current | 92.9 A at 380 V (normal duty)<br />82.7 A at 460 V (normal duty)<br />80.5 A at 380 V (heavy duty)<br />69.6 A at 460 V (heavy duty) |
| Prospective line Isc | 22 kA |
| Apparent power | 65.9 kVA at 460 V (normal duty)<br />55.4 kVA at 460 V (heavy duty) |
| Continuous output current | 88 A at 4 kHz for normal duty<br />75 A at 4 kHz for heavy duty |
| Maximum transient current | 97 A during 60 s (normal duty)<br />112 A during 60 s (heavy duty) |
| Asynchronous motor control profile | Optimized torque mode<br />Constant torque standard<br />Variable torque standard |
| Output frequency | 0.1…500 Hz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...12 kHz adjustable |
| number of preset speeds | 16 preset speeds |
| Communication port protocol | Modbus serial |
| Option card | Slot A: communication card, Profibus DP V1<br />Slot A: digital or analog I/O extension card<br />Slot A: relay output card |
| Output voltage | <= power supply voltage |
| Motor slip compensation | Automatic whatever the load<br />Adjustable<br />Not available in permanent magnet motor law<br />Can be suppressed |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 9000 s<br />S, U or customized |
| Braking to standstill | By DC injection |
| Protection type | Thermal protection: motor<br />Motor phase break: motor<br />Thermal protection: drive<br />Overheating: drive<br />Overcurrent between output phases and earth: drive<br />Overload of output voltage: drive<br />Short-circuit protection: drive<br />Motor phase break: drive<br />Overvoltages on the DC bus: drive<br />Line supply overvoltage: drive<br />Line supply undervoltage: drive<br />Line supply phase loss: drive<br />Overspeed: drive<br />Break on the control circuit: drive |
| Frequency resolution | Display unit: 0.1 Hz<br />Analog input: 0.012/50 Hz |
| Electrical connection | Control, screw terminal: 0.5...1.5 mm²<br />Line side, screw terminal: 35...50 mm²<br />Motor, screw terminal: 50 mm² |
| Connector type | 1 RJ45 (on the remote graphic terminal) for Modbus serial |
| Physical interface | 2-wire RS 485 for Modbus serial |
| Transmission frame | RTU for Modbus serial |
| Transmission rate | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| Type of polarization | No impedance for Modbus serial |
| Number of addresses | 1…247 for Modbus serial |
| Method of access | Slave |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection<br />Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Local signalling | 2 LEDs for local diagnostic<br />1 LED (yellow) for embedded communication status<br />2 LEDs (dual colour) for communication module status<br />1 LED (red) for presence of voltage |
| Width | 226 mm |
| Depth | 271 mm |
| Net weight | 25.5 kg |
| Analogue input number | 3 |
| Analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits<br />AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits<br />AI2, AI3 software-configurable temperature probe or water level sensor |
| Discrete input number | 6 |
| Discrete input type | DI1...DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm<br />DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
| Input compatibility | DI1...DI6: logic input level 1 PLC conforming to IEC 61131-2<br />DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68 |
| Discrete input logic | Positive logic (source): DI1...DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)<br />Negative logic (sink): DI1...DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1)<br />Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1) |
| Analogue output number | 2 |
| Analogue output type | Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits<br />Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Sampling duration | 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input<br />2 ms +/- 0.5 ms (DI1...DI6)configurable - discrete input<br />5 ms +/- 1 ms (DI5, DI6)configurable - pulse input<br />10 ms +/- 1 ms (AQ1, AQ2) - analog output |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input<br />+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input<br />AQ1, AQ2: +/- 0.2 % for analog output |
| Relay output number | 3 |
| Relay output type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles<br />Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles<br />Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Refresh time | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
Item code: XB5AA31
Item code: XB5AA42
Item code: LRD21
Item code: XB5AD33
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
