Nút nhấn & Switch
Item code: XB5AA31
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Biến tần Schneider ATV630D30N4. TESFA hỗ trợ đối chiếu mã, thông số điện và báo giá cho nhu cầu MRO công nghiệp.
Item code
ATV630D30N4
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã hàng | ATV630D30N4 |
| Range of product | Altivar Process ATV600 |
| Hãng sản xuất | Schneider Electric |
| Product specific application | Process and utilities |
| Nhóm sản phẩm | Biến tần |
| Product or component type | Variable speed drive |
| Model / mã đặt hàng | ATV630D30N4 |
| Variant | Standard version |
| Công suất | 30 kW |
| Device short name | ATV630 |
| Chức năng | Điều khiển tốc độ động cơ |
| Mounting mode | Wall mount |
| Communication port protocol | Ethernet<br />Modbus TCP<br />Modbus serial |
| Ứng dụng | Tủ điện, hệ thống phân phối điện, tự động hóa và MRO nhà máy |
| Đối chiếu trước khi mua | Kiểm tra mã đặt hàng, dòng/áp, số cực, option và ảnh nhãn thiết bị đang dùng |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Nguồn dữ liệu | CRM TESFA; ảnh theo mã/series/nhóm Schneider để hỗ trợ nhận diện ban đầu |
| [Us] rated supply voltage | 380...480 V |
| Relative symmetric mains voltage tolerance | 10 % |
| Relative symmetric network frequency tolerance | 5 % |
| nominal output current | 61.5 A |
| IP degree of protection | IP21 |
| Product destination | Asynchronous motors<br />Synchronous motors |
| EMC filter | Integrated with 50 m conforming to IEC 61800-3 category C2<br />Integrated with 150 m conforming to IEC 61800-3 category C3 |
| IP degree of protection | IP21 conforming to IEC 61800-5-1<br />IP21 conforming to IEC 60529 |
| Degree of protection | UL type 1 conforming to UL 508C |
| Type of cooling | Forced convection |
| Supply frequency | 50...60 Hz - 5...5 % |
| Motor power kW | 30 kW (normal duty)<br />22 kW (heavy duty) |
| Motor power hp | 40 hp normal duty<br />30 hp heavy duty |
| Line current | 53.3 A at 380 V (normal duty)<br />45.9 A at 480 V (normal duty)<br />40.5 A at 380 V (heavy duty)<br />35.8 A at 480 V (heavy duty) |
| Continuous output current | 61.5 A at 4 kHz for normal duty<br />46.3 A at 4 kHz for heavy duty |
| Speed drive output frequency | 0.1…500 Hz |
| Safety function | STO (safe torque off) SIL 3 |
| Option card | Slot A: communication module, Profibus DP V1<br />Slot A: communication module, PROFINET<br />Slot A: communication module, DeviceNet<br />Slot A: communication module, Modbus TCP/EtherNet/IP<br />Slot A: communication module, CANopen daisy chain RJ45<br />Slot A: communication module, CANopen SUB-D 9<br />Slot A: communication module, CANopen screw terminals<br />Slot A/slot B: digital and analog I/O extension module<br />Slot A/slot B: output relay extension module<br />Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link<br />Communication module, BACnet MS/TP<br />Communication module, Ethernet Powerlink |
| Discrete input number | 8 |
| Discrete input type | DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
| Discrete input logic | 16 preset speeds |
| Discrete output number | 0 |
| Discrete output type | Relay outputs R1A, R1B, R1C 250 V AC 3000 mA<br />Relay outputs R1A, R1B, R1C 30 V DC 3000 mA<br />Relay outputs R2A, R2C 250 V AC 5000 mA<br />Relay outputs R2A, R2C 30 V DC 5000 mA<br />Relay outputs R3A, R3C 250 V AC 5000 mA<br />Relay outputs R3A, R3C 30 V DC 5000 mA |
| Analogue input number | 3 |
| Analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits<br />AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits<br />AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
| Analogue output number | 2 |
| Analogue output type | Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits<br />Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits<br />Software-configurable current DQ-, DQ+: 30 V DC<br />Software-configurable current DQ-, DQ+: 100 mA |
| Relay output number | 3 |
| Relay output type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles<br />Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles<br />Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Maximum switching current | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC<br />Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC<br />Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC<br />Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Minimum switching current | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Network number of phases | 3 phases |
| Physical interface | Ethernet<br />2-wire RS 485 |
| Method of access | Slave Modbus TCP |
| Transmission rate | 10, 100 Mbits<br />4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
| Transmission frame | RTU |
| Output voltage | <= power supply voltage |
| Permissible temporary current boost | 1.1 x In during 60 s (normal duty)<br />1.5 x In during 60 s (heavy duty) |
| Data format | 8 bits, configurable odd, even or no parity |
| Type of polarization | No impedance |
| Frequency resolution | Display unit: 0.1 Hz<br />Analog input: 0.012/50 Hz |
| Electrical connection | Control: removable screw terminals 0.5...1.5 mm²/20 AWG...16 AWG<br />Line side: screw terminal 25...50 mm²/4 AWG...1 AWG<br />Motor: screw terminal 25...50 mm²/4 AWG...1 AWG |
| Connector type | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP<br />RJ45 (on the remote graphic terminal) for Modbus serial |
| Exchange mode | Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Number of addresses | 1…247 for Modbus serial |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection<br />Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection<br />Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
| Local signalling | 3 LEDs for local diagnostic<br />3 LEDs (dual colour) for embedded communication status<br />4 LEDs (dual colour) for communication module status<br />1 LED (red) for presence of voltage |
| Input compatibility | DI1...DI6: discrete input level 1 PLC conforming to IEC 61131-2<br />DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68<br />STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2 |
| Discrete input logic | Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)<br />Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) |
| Sampling duration | 2 ms +/- 0.5 ms (DI1...DI4) - discrete input<br />5 ms +/- 1 ms (DI5, DI6) - discrete input<br />5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input<br />10 ms +/- 1 ms (AO1) - analog output |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input<br />+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input<br />AO1, AO2: +/- 0.2 % for analog output |
Item code: XB5AA31
Item code: XB5AA42
Item code: LRD21
Item code: XB5AD33
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
