Chưa cập nhật
Item code: 131150435
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến an toàn từ Schmersal 101187774.
Item code
101187774
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | 101187774 |
| Mã đặt hàng Schmersal | 101187774 |
| Model Schmersal | EX-BNS 303-12Z-2187-3G/D 5,0M |
| Explosion protection: regulations | EN 60079-31 EN IEC 60079-0 EN IEC 60079-15 |
| Explosion protection zones | 2 22 |
| Explosion protection category | 3D 3G |
| Explosion protection designation | D II 3D Ex tc IIIC T80°C Dc X D II 3G Ex nC IIC T6 Gc X |
| Manufacturer declaration | ATEX Zone 2 and 22 |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | quasi-flush |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Material of the nuts | Thermoplastic |
| Gross weight | 226 g |
| Coding | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Number of normally closed (NC) | 2 |
| Number of normally open (NO) | 1 |
| Number of safety contacts | 2 |
| Active area | front side |
| Actuating element | Magnet |
| Impact energy, maximum | 4 J |
| Direction of motion | Head-on to the active surface |
| Tightening torque of nuts, maximum | 3 Nm |
| Assured switching distance "ON" Sao | 5 mm |
| Assured switching distance "OFF" Sar | 15 mm |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-3 |
| Length of cable | 5 m |
| Termination | cable |
| Number of cable wires | 6 |
| Wire cross-section | 0.25 mm2 | 23 AWG |
| Material of the Cable mantle | PVC |
| ISO thread of the sensor | M30 |
| width across flats | 36 BK |
| Length of sensor | 44 mm |
| IP Degree of protection | IP67 |
| Ambient temperature | -25 ... +70 °C |
| Storage and transport temperature | -25 ... +70 °C |
| Resistance to vibrations | 10 ... 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Switching voltage, maximum | 100 VAC | 100 VDC |
| Switching current, maximum | 0.4 A |
| Switching capacity, maximum | 10 W |
| Switching element | 1 NO contact, 2 NC contacts |
| Switching principle | Reed contacts, Non-contact principle |
| Switching frequency, maximum | 5 Hz |
| Recommendation (actuator) | BPS 300 BPS 303 BPS 303 SS coded |
| Recommended safety switchgear | SRB-E-201LC SRB-E-301ST |
| Note (General) | Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical. |
Item code: 131150435
Item code: 151180590
Item code: 103040784
Item code: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
