Chưa cập nhật
Item code: IFS203
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến áp suất IFM PI2207. Number of inputs and outputs: Number of digital outputs: 2; Number of analog outputs: 1; Measuring range: -50...1000 mbar: -0.73...14.5 psi: -5...100 kPa.
Item code
PI2207
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | PI2207 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range | -50...1000 mbar: -0.73...14.5 psi: -5...100 kPa |
| Process connection | Clamp DN40 (1,5") DIN 32676 (ISO 2852) |
| Special feature | gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -20...200; (-20...90 < 0 bar) |
| Min. burst pressure | 30000 mbar: 435 psi: 3000 kPa |
| Pressure rating | 10000 mbar: 145 psi: 1000 kPa |
| Type of pressure | relative pressure |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Operating voltage [V] | 20...32 DC; 18...32 DC |
| Current consumption [mA] | 3.6...21; < 45 |
| Power-on delay time [s] | 1; 0.5 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20, invertible; (scalable) |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. load [Ω] | 300; (Ub - 10 V) / 20 mA |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 125 |
| Set point SP | -48...1000 mbar: -0.7...14.5 psi: -4.8...100 kPa |
| Reset point rP | -50...998 mbar: -0.73...14.47 psi: -0.5...99.8 kPa |
| Analog start point | -50...750 mbar: -0.73...10.88 psi: -5...75 kPa |
| Analog end point | 200...1000 mbar: 2.9...14.5 psi: 20...100 kPa |
| In steps of | 1 mbar: 0.01 psi: 0.1 kPa |
| Factory setting | SP1 = 250 mbar: rP1 = 230 mbar; SP2 = 750 mbar: rP2 = 730 mbar; ASP = 0 mbar: AEP = 1000 mbar |
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Zero-point stabilization [% of the span] | IO-Link, analog output: 0,15; Display, Switching output: 0,2 |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,3; (0...200 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0...200 °C) |
| Damping process value dAP [s] | 0...30 |
| Damping for the analog output dAA [s] | 0.01...99.99 |
| Step response time analog output [ms] | 45; 7 |
| Min. response time of switching output (dAP) [ms] | 3 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SDCI standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 256 |
| Ambient temperature [°C] | -25...80; -25...65 |
| Note on ambient temperature | Medium temperature: ≤ 160 °C; Medium temperature: ≤ 200 °C |
| Storage temperature [°C] | -25...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 142 |
| Note on approval | Including free 6-point calibration certificate. |
| Weight [g] | 1052.2 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 163 |
| Material | stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA |
| Materials (wetted parts) | stainless steel (1.4435 / 316L) |
| Min. pressure cycles | 10 million |
| Suitable for process connections in accordance with the standards | DIN 32676 series A (DIN): clamp DN40; DIN 32676 series B (ISO): clamp DN42,4; DIN 32676 series C (ASME BPE): clamp 1,5"; ISO 2852: clamp DN38 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.38 µm |
| Fill fluid for pressure transfer | NEOBEE (food grade, FDA compliant) |
| Diaphragm diameter [mm] | 34 |
| Display | Display unit: LED, green; Switching status: LED, yellow; Function display: alphanumeric display, 4-digit; Measured values: alphanumeric display, 4-digit |
| Display unit | mbar; kPa; psi; inH2O; mWS; % of the span |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
Item code: IFS203
Item code: EVT406
Item code: IG5526
Item code: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
