Chưa cập nhật
Item code: IFS203
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến lưu lượng IFM SB2234. Measuring range: 1...50 l/min: 0.06...3 m³/h: 16...793 gph: 0.26...13.2 gpm; -10...100 °C: 14...212 °F; Process connection: threaded connection G 3/4 Internal thread.
Item code
SB2234
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | SB2234 |
| Measuring range | 1...50 l/min: 0.06...3 m³/h: 16...793 gph: 0.26...13.2 gpm; -10...100 °C: 14...212 °F |
| Process connection | threaded connection G 3/4 Internal thread |
| Special feature | gold-plated contacts |
| Media | Liquids; oils (viscosity 46 mm²/s at 40 °C) |
| Medium temperature [°C] | -10...100 |
| Pressure rating | 100 bar: 10 MPa |
| Note on pressure rating | at medium temperature >70°C: 80 bar / 8 MPa |
| Operating voltage [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; frequency signal; IO-Link |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Max. current load per output [mA] | 150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature) |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output [Hz] | 0...10000 |
| Display range | 0...60 l/min: 0...3.6 m³/h: 0...951 gph: 0...15.86 gpm; -32...122 °C: -25.6...251.6 °F |
| Resolution | 0.01 l/min: 0.001 m³/h: 1 gph: 0.01 gpm; 0.1 °C: 0.1 °F |
| Set point SP | 0.35...50 l/min: 0.02...3 m³/h: 5...793 gph: 0.08...13.2 gpm; -9.3...100 °C: 15.2...212 °F |
| Reset point rP | 0...49.65 l/min: 0...2.98 m³/h: 0...787 gph: 0...13.12 gpm; -10...99.3 °C: 14...210.8 °F |
| Frequency end point, FEP | 3.35...50 l/min: 0.2...3 m³/h: 53...793 gph: 0.88...13.2 gpm; 12...100 °C: 53.6...212 °F |
| In steps of | 0.05 l/min: 0.005 m³/h: 1 gph: 0.02 gpm; 0.1 °C: 0.2 °F |
| Frequency at the end point FRP [Hz] | 10...10000 |
| In steps of [Hz] | 10 |
| Measuring dynamics | 1:50 |
| Frequency start point, FSP | -10...78 °C: 14...172.4 °F |
| Accuracy (in the measuring range) | ± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,029 °C / K |
| Accuracy [K] | 3 K (25°C; Q > 1 l/min) |
| Response time [s] | 0.01 |
| Damping process value dAP [s] | 0...5 |
| In steps of [s] | 0.1 |
| Damping for the analog output dAA [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 120 (Q > 1 l/min) |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current/frequency output; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color; calibration factor |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1045 |
| Ambient temperature [°C] | 0...60 |
| Note on ambient temperature | medium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C |
| Storage temperature [°C] | -15...80 |
| Protection | IP 65; IP 67 |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 145 |
| UL approval | UL approval number: I005; File number UL: E174189 |
| Pressure equipment directive | sound engineering practice |
| Weight [g] | 991.5 |
| Material | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated |
| Materials (wetted parts) | stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM |
| Switching cycles mechanical | 10 million |
| Display | Display unit: 6 x LED, green; Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green alternating indication 4-digit; Programming: alphanumeric display, 4-digit |
| Remarks | Use of 200 micron filtration is recommended.; All data refer to oil with the following nominal viscosity: 46 mm²/s, 40 °C; MW = Measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
Item code: IFS203
Item code: EVT406
Item code: IG5526
Item code: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
