Chưa cập nhật
Item code: IFS203
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến lưu lượng IFM SBN246. Number of inputs and outputs: Number of digital outputs: 2; Number of analog outputs: 1; Measuring range [gph]: 30...1620.
Item code
SBN246
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | SBN246 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range [gph] | 30...1620 |
| Process connection | threaded connection 1" NPT Internal thread |
| Special feature | gold-plated contacts |
| Application | for industrial applications |
| Media | Liquids; water; glycol solutions; Coolants; oil (viscosity 10 mm²/s at 104 °F); oil (viscosity 46 mm²/s at 104 °F) |
| Note on media | oil 1 with viscosity: 10 mm²/s (104 °F); oil 2 with viscosity: 46 mm²/s (104 °F) |
| Medium temperature [°F] | 14...212 |
| Pressure rating | 25 bar: 2.5 MPa |
| MAWP (for applications according to CRN) [bar] | 25 |
| Operating voltage [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption [mA] | < 50 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; frequency signal; IO-Link; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 150; (per output 2 x 200 (...140 °F); 2 x 250 (...104 °F)) |
| Switching cycles (mechanical) | 10 million |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output [Hz] | 0...10000 |
| Display range | 0...1940 gph: 0...32.4 gpm |
| Resolution | 10 gph: 0.1 gpm |
| Set point SP | 10...1620 gph: 0.2...27 gpm |
| Reset point rP | 0...1610 gph: 0...26.8 gpm |
| Frequency end point, FEP | 110...1620 gph: 1.8...27 gpm |
| In steps of | 10 gph: 0.1 gpm |
| Frequency at the end point FRP [Hz] | 10...10000 |
| Measuring dynamics | 1:50 |
| Measuring range [°F] | 14...212 |
| Display range [°F] | -26...252 |
| Resolution [°F] | 2 |
| Set point SP [°F] | 16...212 |
| Reset point rP [°F] | 14...210 |
| In steps of [°F] | 2 |
| Frequency start point, FSP [°F] | 14...172 |
| Frequency end point, FEP [°F] | 54...212 |
| Accuracy (in the measuring range) | ± (4 % MW + 1 % MEW); (Q > 2 l/min; medium and operating temperature: +71,6 °F ± 4K) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,9802 °F / K |
| Accuracy [K] | 3 K (77 °F; Q > 1 l/min) |
| Response time [s] | 0.01 |
| Damping process value dAP [s] | 0...5 |
| Damping for the analog output dAA [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 120 (Q > 1 l/min) |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current output; medium selection; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 568 |
| Ambient temperature [°F] | 32...140 |
| Note on ambient temperature | medium temperature < 176 °F; medium temperature < 212 °F: 32...104 °F |
| Storage temperature [°F] | 5...176 |
| Protection | IP 65; IP 67 |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 145 |
| UL approval | UL approval number: I006; File number UL: E174189 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g] | 1292.4 |
| Material | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated |
| Materials (wetted parts) | stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass chemically nickel-plated; PPS; O-ring: FKM |
| Display | Display unit: 3 x LED, green; Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green 4-digit; Programming: alphanumeric display, 4-digit |
| Remarks | Use of 200 micron filtration is recommended.; All data refer to water (68 °F).; MW = Measured value; MEW = Final value of the measuring range |
| Notes | Please note the changed housing design! |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
Item code: IFS203
Item code: EVT406
Item code: IG5526
Item code: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
