Chưa cập nhật
Item code: IFS203
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến quang IFM O5D100. Type of light: red light; Laser protection class: 2.
Item code
O5D100
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | O5D100 |
| Type of light | red light |
| Laser protection class | 2 |
| Housing | rectangular |
| Special feature | Background suppression |
| Application | Industrial applications |
| Operating voltage [V] | 10...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | 75; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 650 |
| Typ. lifetime [h] | 50000 |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (complementary) |
| Max. current load per output [mA] | 100 |
| Switching frequency DC [Hz] | 11 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. light spot diameter [mm] | 5 |
| Light spot dimensions refer to | 2 m |
| Detection range hysteresis [%] | < 2.5 |
| Note on monitoring range hysteresis | black 6 % remission |
| Background suppression [m] | < 20 |
| Measuring range [m] | 0.03...2 |
| Sampling rate [Hz] | 33 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Multiple switching signal; Function: Process data variable |
| SIO mode | yes |
| Process data analog | 1 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 6.4 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 372 |
| Ambient temperature [°C] | -25...60 |
| Note on ambient temperature | at ta < -10 °C warm-up is necessary, laser is off |
| Protection | IP 65; IP 67 |
| Max. immunity to extraneous light [klx] | 10; (on the object) |
| EMC | EN 60947-5-2 |
| Vibration resistance | DIN EN 60068-2-6: 10 g (10...55 Hz) / 120 min. per axis (x, y, z) |
| Shock resistance | DIN EN 60068-2-27: 50 g 6 shocks / 11 ms half-sine (x, y, z) |
| Notes on laser protection | Caution:: Laser light; Power:: <= 4,0 mW; Wave length:: 650 nm; pulse:: 1,3 ns; Do not stare into beam.; Avoid exposure to the laser light.; laser class:: 2; EN / IEC60825-1:2007; EN / IEC60825-1:2014; Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
| MTTF [years] | 151 |
| Weight [g] | 61.6 |
| Dimensions [mm] | 56 x 18.2 x 46.8 |
| Material | housing: PA; Front framework: stainless steel; operator interface: TPU (urethane); lens: PMMA |
| Lens alignment | Side sensing |
| Display | Switching status: LED, yellow Switching output PIN 4; Power: LED, green; Display: alphanumeric display, 3-digit |
| Display unit | cm |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |
Item code: IFS203
Item code: EVT406
Item code: IG5526
Item code: II5961
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
