Chưa cập nhật
Item code: TK BR 53
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến siêu âm dạng khe LEUZE IGSU14E/1WT.3-M12. Basic data / Series: 14; Basic data / Principle of physics: Ultrasonics; Basic data / Application: Detection of non-transparent labels; Detection of transparent labels
Item code
IGSU14E/1WT.3-M12
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | IGSU14E/1WT.3-M12 |
| Mã đặt hàng của hãng | 50142872 |
| Basic data / Series | 14 |
| Basic data / Principle of physics | Ultrasonics |
| Basic data / Application | Detection of non-transparent labels; Detection of transparent labels |
| Basic data / Label width, min. | 4 mm |
| Basic data / Label gap, min. | 2 mm |
| Basic data / Medium | Transparent and not transparent |
| Special version / Special version | ALC function (tracking); Manual fine tuning of the switching threshold; Teach input; Warning output; easyTeach function |
| Electrical data / Protective circuit | Polarity reversal protection; Short circuit protected |
| Performance data / Supply voltage U B | 18 ... 30 V, DC |
| Performance data / Residual ripple | 0 ... 10 %, From U B |
| Performance data / Open-circuit current | 0 ... 60 mA, Typical value |
| Inputs / Number of teach inputs | 1 Piece(s) |
| Teach inputs / Type | Teach input |
| Teach inputs / Voltage type | DC |
| Teach inputs / Switching voltage | high: ≥9V; low: ≤ 2 V |
| Teach inputs / Input resistance | 15,000 Ω |
| Teach input 1 / Active switching state | High |
| Outputs / Number of digital switching outputs | 2 Piece(s) |
| Switching outputs / Type | Digital switching output |
| Switching outputs / Voltage type | DC |
| Switching outputs / Switching current, max. | 100 mA |
| Switching outputs / Switching voltage | high: ≥(U B -2V); low: ≤ 2 V |
| Switching outputs / Load capacity | 0.01 µF |
| Switching output 1 / Switching element | Transistor, Push-pull |
| Switching output 1 / Switching principle | IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label) |
| Switching output 2 / Switching element | Transistor, Push-pull |
| Switching output 2 / Switching principle | active low (normal operation high, event case low) |
| Time behavior / Switching frequency | 2,000 Hz |
| Time behavior / Response time | 0.2 ms |
| Time behavior / Readiness delay | 300 ms |
| Time behavior / Max. conveyor speed during teach-in | 50 m/min |
| Interface / Type | IO-Link |
| IO-Link / COM mode | COM3 |
| IO-Link / Profile | Smart sensor profile |
| IO-Link / Min. cycle time | COM3 = 0.5 ms |
| IO-Link / Frame type | 2.5 |
| IO-Link / Specification | V1.1 |
| IO-Link / Device ID | 2511 |
| IO-Link / SIO-mode support | Yes |
| Connection / Number of connections | 1 Piece(s) |
| Connection 1 / Function | Signal IN; Signal OUT; Voltage supply |
| Connection 1 / Type of connection | Connector |
| Connection 1 / Thread size | M12 |
| Connection 1 / Type | Male |
| Connection 1 / Material | Metal |
| Connection 1 / No. of pins | 5 -pin |
| Connection 1 / Encoding | A-coded |
| Connection 1 / Plug outlet | Horizontal (parallel to belt movement) |
| Mechanical data / Design | Fork |
| Mechanical data / Mouth width | 4 mm |
| Mechanical data / Mouth depth | 80 mm |
| Mechanical data / Dimension (W x H x L) | 22 mm x 46.9 mm x 96 mm |
| Mechanical data / Housing material | Metal |
| Mechanical data / Metal housing | Diecast zinc, galvanic nickel coating |
| Mechanical data / Net weight | 270 g |
| Mechanical data / Housing color | Silver |
| Mechanical data / Type of fastening | Mounting thread; Through-hole mounting |
| Operation and display / Type of display | LED |
| Operation and display / Number of LEDs | 4 Piece(s) |
| Operation and display / Operational controls | Control buttons |
| Operation and display / Function of the operational control | Dynamic teach on label carrier and label |
| Environmental data / Ambient temperature, operation | 0 ... 60 °C |
| Environmental data / Ambient temperature, storage | -40 ... 70 °C |
Item code: TK BR 53
Item code: HT55C/LG-200-M12
Item code: PRK 18/24 DL.46
Item code: LE55CI.H2O/4P-200-M12
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
