Chưa cập nhật
Item code: 131150435
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Công tắc an toàn tác động rời Schmersal 101157373.
Item code
101157373
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | 101157373 |
| Mã đặt hàng Schmersal | 101157373 |
| Model Schmersal | AZ 16-12ZVRK-M20 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | mechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 115 g |
| Increased latching force | Yes |
| Number of actuating directions | 3 |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 2 |
| Number of cable glands | 3 |
| Performance Level, up to | c | d |
| Category | 1 | 3 |
| Note | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit. | All indications including the conductor ferrules. |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Position of the cable gland | on the floor side, left and right |
| Latching force | 30 N |
| Positive break travel | 8 mm |
| Positive break force per NC contact, minimum | 10 N |
| Positive break force, minimum | 20 N |
| Actuating speed, maximum | 2 m/s |
| Mounting | Fine-adjustment through slotted holes Round holes |
| Type of the fixing screws | 2x M5 |
| Cable entry | 3 x M20 x 1,5 |
| Cable section, minimum | 0.25 mm2 |
| Cable section, maximum | 2.5 mm2 |
| Allowed type of cable | flexible solid multi-wire solid single-wire |
| Terminal (mechanical) | Screw terminals |
| Tool for the connection | SL / PZ 2 |
| Strip length | 6 mm |
| Length of sensor | 30 mm |
| Width of sensor | 52 mm |
| Height of sensor | 90 mm |
| IP Degree of protection | IP67 |
| Ambient temperature | -30 ... +80 °C |
| Storage and transport temperature | -40 ... +85 °C |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Rated insulation voltage Ui | 500 V |
| Rated impulse withstand voltage Uimp | 6 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Thermal test current | 10 A |
| Required rated short-circuit current | 1,000 A |
| Switching element | 1 NO contact, 2 NC contacts |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 4,000 /h |
| Material of the contacts, electrical | Silver |
| Voltage, Utilisation category AC-15 | 230 VAC | 230 VAC |
| Current, Utilisation category AC-15 | 4 A | 4 A |
| Note, Utilisation category AC-15 | Screw terminals | Screw terminals |
| Voltage, Utilisation category DC-13 | 24 VDC | 24 VDC |
| Current, Utilisation category DC-13 | 4 A | 4 A |
| Note, Utilisation category DC-13 | Screw terminals | Screw terminals |
Item code: 131150435
Item code: 151180590
Item code: 103040784
Item code: 101133843
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
