Chưa cập nhật
Item code: LR-TB5000C
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
FS-V33CP Keyence — Fiber Amplifier, M8 Connector Type, Main Unit, PNP. Ảnh và thông số được xác minh từ trang sản phẩm chính hãng đúng model.
Item code
FS-V33CP
Unit
Chưa cập nhật
Supply status
Liên hệ báo giá
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Model | FS-V33CP |
| Nguồn chính hãng | https://www.keyence.com/products/sensor/fiber-optic/fs-v30/models/fs-v33cp/ |
| Type | 2-output with / M8 connector |
| Output | PNP |
| Main unit/Expansion unit | Main unit |
| Control output | 2 outputs |
| Monitor output (1 to 5 V) | N/A |
| Connector | M8 |
| Light source LED | Red, 4-element LED (Wavelength: 640 nm) |
| Response time | 33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO) |
| Output selection | LIGHT-ON/DARK-ON (switch-selectable) |
| Display indicator | Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and / Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, / Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations / Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display |
| Size | 30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D) |
| Detection mode | Light intensity (area detection possible, automatic sensitivity-tracking function provided)/ / [Limited light intensity/Count check/Abnormality detection] |
| Timer function | OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable / Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max. |
| Control output | PNP open-collector 24 V, 100 mA max. *1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max. |
| External inputy | Input time: 2 ms (ON)/20 ms (OFF) min. *2 |
| Unit expansion | Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units. |
| Number of interference prevention units - Normal operation | HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台 |
| Rating - Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Power consumption | Normal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/ / Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V, / 32 mA max.) *3 |
| Environmental resistance - Ambient light | Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
| Ambient temperature | -10 to +55 °C 14 to 131 °F (No freezing) *4 |
| Relative humidity | 35 to 85 % RH (No condensation) |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06" , 2 hours in each of the X, Y, and Z directions |
| Shock resistance | 500 m/s 2 , 3 times in each of the X, Y, and Z directions |
| Case material | Polycarbonate |
| Accessories | N/A |
| Weight | Approx. 22 g |
Item code: LR-TB5000C
Item code: GS-P8C10
Item code: GS-P8C5
Item code: PX-H72
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Quy trình đối chiếu cảm biến thay thế theo cơ khí, điện và chức năng. Có ma trận kiểm tra, ví dụ tình huống và hồ sơ cần gửi để xác minh.
Chọn cáp cảm biến M8/M12 theo đầu đực/cái, số cực, coding, sơ đồ chân và môi trường. Có hình minh họa, bảng kiểm và mẫu yêu cầu báo giá.
