Sensor
Item code: NBN40-L2-E2-V1
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến quang IFM O1D100. Laser protection class: 2; Housing: rectangular.
Item code
O1D100
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | O1D100 |
| Laser protection class | 2 |
| Housing | rectangular |
| Application | Industrial applications |
| Operating voltage [V] | 18...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 150 |
| Protection class | III |
| Reverse polarity protection | yes |
| Typ. lifetime [h] | 50000 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. current load per output [mA] | 200 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (IEC 61131-2) |
| Max. load [Ω] | 250 |
| Analog voltage output [V] | 0...10; (IEC 61131-2) |
| Min. load resistance [Ω] | 5000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. light spot diameter [mm] | 25 |
| Light spot dimensions refer to | 10 m |
| Background suppression [m] | 0...19 |
| Measuring range [m] | 0.2...10; (white paper 200 x 200 mm 90 % remission) |
| Sampling rate [Hz] | 1...50 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 3 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 806 |
| Ambient temperature [°C] | -10...60 |
| Protection | IP 67 |
| EMC | EN 60947-5-2 |
| Notes on laser protection | Caution:: Laser light; Power:: <= 4 mW; Wave length:: 650 nm; pulse:: 1,3 ns; Do not stare into beam.; Avoid exposure to the laser light.; laser class:: 2; EN / IEC60825-1:2007; EN / IEC60825-1:2014; Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
| MTTF [years] | 182 |
| Weight [g] | 243.5 |
| Dimensions [mm] | 59 x 42 x 52 |
| Material | housing: diecast zinc; front lens: glass; LED window: PC |
| Lens alignment | Side sensing |
| Display | Switching status: 2 x LED, yellow; Power: LED, green; Distance, programming: alphanumeric display, 4-digit |
| Accessories (optional) | Protective cover, E21133 |
| Remarks | For more information about the measuring range / application please refer to the operating instructions. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |
Item code: NBN40-L2-E2-V1
Item code: ODS10L1.8/LAK-M12
Item code: BNS 260-11ZG-ST-L
Item code: 067B3342
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
