Sensor
Item code: ODS10L1.8/LAK-M12
- Unit
- Cái
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Cảm biến tiệm cận điện cảm SICK IMA18-10BE1ZC0K. Features / Housing: Metric; Features / Thread size: M18 x 1; Features / Diameter: Ø 18 mm
Item code
IMA18-10BE1ZC0K
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | IMA18-10BE1ZC0K |
| Mã đặt hàng của hãng | 6041793 |
| Features / Housing | Metric |
| Features / Thread size | M18 x 1 |
| Features / Diameter | Ø 18 mm |
| Features / Sensing range S n | 0 mm ... 10 mm |
| Features / Installation type | Quasi-flush |
| Features / Connection type | Male connector M12, 4-pin |
| Features / Output function | Analog |
| Features / Repeatability (T a not constant) | 0.3 mm 1) 2) 3) |
| Features / Repeatability (T a constant) | ± 0.02 mm |
| Features / Resolution | ≤ 2 µm |
| Features / Enclosure rating | IP67 4) |
| Features / Special features | Analog output, triple sensing range |
| Features / Items supplied | Mounting nut, brass, chromium-plated (2x); Toothed washer, stainless steel (2 x); |
| Features / Chú thích từ hãng | 1) As per IEC 60947-5-2.; 2) Ub = DC 20 V ... 30 V.; 3) TA = 23 °C ± 5 °C.; 4) According to EN 60529: 2000-09.; |
| Mechanics/electronics / Supply voltage | 15 V DC ... 30 V DC |
| Mechanics/electronics / Ripple | ≤ 20 % 1) |
| Mechanics/electronics / Time delay before availability | ≤ 50 ms |
| Mechanics/electronics / Temperature drift (of S r ) | ≤ 10 % |
| Mechanics/electronics / No load current | ≤ 12 mA 2) |
| Mechanics/electronics / Load current | ± 10 mA 3) |
| Mechanics/electronics / Max. load resistance | ≤ 400 Ω Ub = 15 V; ≤ 1,000 Ω Ub = 30 V; |
| Mechanics/electronics / Output voltage Q A1 | s = 0 mm: 0 V/-0 +0,4 V (23 °C); s = 5 mm: +5,2 V/ +-0,4 V (23 °C); s = 10 mm: +10 V/ +-0,4 V (23 °C); |
| Mechanics/electronics / Output current Q A2 | s = 0 mm: 4 mA/ +-0,8 mA (23 °C); s = 10 mm: 20 mA +/-0,8 mA (23 °C); |
| Mechanics/electronics / Output voltage | 0 V ... 10 V |
| Mechanics/electronics / Bandwidth | 500 Hz 4) |
| Mechanics/electronics / Short-circuit protection | ✔ |
| Mechanics/electronics / Ambient operating temperature | –25 °C ... +70 °C 5) 6) |
| Mechanics/electronics / Housing material | Brass, chromium-plated |
| Mechanics/electronics / Sensing face material | Plastic, PTB |
| Mechanics/electronics / Housing length | 48.5 mm |
| Mechanics/electronics / Thread length | 32 mm |
| Mechanics/electronics / Chú thích từ hãng | 1) Of V S .; 2) Without load.; 3) At voltage output QA1.; 4) –3 dB if S n = 5 mm.; 5) QA1 loaded, QA2 unloaded.; 6) QA1 loaded, QA2 loaded: see temperature reduction.; |
| Reduction factors / Note | The values are reference values which may vary |
| Reduction factors / Stainless steel (V2A, 304) | Approx. 0.6 |
| Reduction factors / Aluminum (Al) | Approx. 0.18 |
| Reduction factors / Copper (Cu) | Approx. 0.15 |
| Reduction factors / Brass (Br) | Approx. 0.28 |
| Installation note / Remark | Associated graphic see "Installation" |
| Installation note / A | 10 mm |
| Installation note / B | 26 mm |
| Installation note / C | 18 mm |
| Installation note / D | 30 mm |
| Installation note / E | 4 mm |
| Installation note / F | 100 mm |
Item code: ODS10L1.8/LAK-M12
Item code: BNS 260-11ZG-ST-L
Item code: 067B3342
Item code: DBS36E-S3EK02000
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
