Chưa cập nhật
Item code: DBS36E-S3EK02000
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Bộ mã hóa vòng quay SICK ATM60-PAH13X13. Performance / Number of steps per revolution (max. resolution): 8,192 (13 bit); Performance / Number of revolutions: 8,192 (13 bit); Performance / Max. resolution (number of steps per revolution x number of revolutions): 13 bit x 13 bit (8,192 x 8,192)
Item code
ATM60-PAH13X13
Unit
Chưa cập nhật
Supply status
Contact for quote
Required quantity (Chưa cập nhật)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | ATM60-PAH13X13 |
| Mã đặt hàng của hãng | 1030015 |
| Performance / Number of steps per revolution (max. resolution) | 8,192 (13 bit) |
| Performance / Number of revolutions | 8,192 (13 bit) |
| Performance / Max. resolution (number of steps per revolution x number of revolutions) | 13 bit x 13 bit (8,192 x 8,192) |
| Performance / Measuring step | 0.043° |
| Performance / Error limits G | ± 0.25° 1) |
| Performance / Chú thích từ hãng | 1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.; 2) In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.; |
| Interfaces / Communication interface | PROFIBUS DP |
| Interfaces / Communication Interface detail | DPV0 |
| Interfaces / Data protocol | Profile for encoders (07hex) – Class 2 |
| Interfaces / Address setting | 0 ... 127, DIP switches or protocol |
| Interfaces / Data transmission rate (baud rate) | 9.6 kBaud ... 12 MBaud, automatic detection |
| Interfaces / Initialization time | 1,250 ms 1) |
| Interfaces / Position forming time | 0.25 ms |
| Interfaces / Status information | LED green (operation), LED red ( bus activity) |
| Interfaces / Bus termination | DIP switch 2) |
| Interfaces / Set (electronic adjustment) | Via PRESET push button or protocol |
| Interfaces / Chú thích từ hãng | 1) Valid positional data can be read once this time has elapsed.; 2) Should only be connected in the final device.; |
| Electronics / Connection type | Bus adapter 1) |
| Electronics / Supply voltage | 10 ... 32 V |
| Electronics / Power consumption | ≤ 2 W (without load) |
| Electronics / Reverse polarity protection | ✔ |
| Electronics / Chú thích từ hãng | 1) Order bus adapter separately.; |
| Mechanics / Mechanical design | Blind hollow shaft |
| Mechanics / Shaft diameter | 15 mm 1) |
| Mechanics / Weight | 0.59 kg 2) |
| Mechanics / Shaft material | Stainless steel |
| Mechanics / Flange material | Aluminum |
| Mechanics / Start up torque | 1.2 Ncm (+20 °C), with shaft seal |
| Mechanics / Operating torque | 0.8 Ncm (+20 °C), with shaft seal |
| Mechanics / Permissible movement static | ± 0.3 mm (radial); ± 0.5 mm (axial); |
| Mechanics / Permissible movement dynamic | ± 0.1 mm (radial); ± 0.2 mm (axial); |
| Mechanics / Operating speed | ≤ 3,000 min⁻¹ 3) |
| Mechanics / Moment of inertia of the rotor | 55 gcm² |
| Mechanics / Angular acceleration | ≤ 500,000 rad/s² |
| Mechanics / Chú thích từ hãng | 1) Collets for 6, 8, 10, 12, 14 mm and 1/4", 3/8" and 1/2" as accessories, separate order item. For 15 mm shaft diameter collet is not needed.; 2) Based on encoder with male connector.; 3) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.; |
| Ambient data / EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Ambient data / Enclosure rating | IP67, with shaft seal (IEC 60529) 1) ; IP43, without shaft seal, on encoder flange not sealed (IEC 60529) 1) ; IP66, without shaft seal, on encoder flange sealed (IEC 60529) 1) ; |
| Ambient data / Permissible relative humidity | 98 % |
| Ambient data / Operating temperature range | –20 °C ... +85 °C |
| Ambient data / Storage temperature range | –40 °C ... +100 °C, without package |
| Ambient data / Resistance to shocks | 100 g, 6 ms (EN 60068-2-27) |
| Ambient data / Resistance to vibration | 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Ambient data / Chú thích từ hãng | 1) With mating connector fitted.; |
Item code: DBS36E-S3EK02000
Item code: IMA18-10BE1ZC0K
Item code: WTE280-2P4331
Item code: DBS36E-S3EJ02000
Hướng dẫn đọc mã van điện từ SMC dòng SY3000, SY5000, SY7000 và SY9000 theo catalog hãng, kèm ví dụ SKU thật và checklist tránh đặt nhầm cấu hình.
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
