Chưa cập nhật
Item code: DBS36E-S3EK02000
- Unit
- Chưa cập nhật
Loading content…
Loading content…
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
Bộ mã hóa vòng quay SICK DFS60B-S4CA02048. Performance / Pulses per revolution: 2,048 1); Performance / Measuring step: 90°, electric/pulses per revolution; Performance / Measuring step deviation at binary number of lines: ± 0.008°
Item code
DFS60B-S4CA02048
Unit
Cái
Supply status
Liên hệ báo giá
Required quantity (Cái)
No online payment is required. TESFA will verify the item code, quantity, supply conditions and respond with a quotation using your contact details.
For MRO items, verifying the correct code matters more than selecting by image. TESFA checks the key technical points before confirming a quotation.
| Attribute | Product specification |
|---|---|
| Mã sản phẩm | DFS60B-S4CA02048 |
| Mã đặt hàng của hãng | 1037235 |
| Performance / Pulses per revolution | 2,048 1) |
| Performance / Measuring step | 90°, electric/pulses per revolution |
| Performance / Measuring step deviation at binary number of lines | ± 0.008° |
| Performance / Error limits | ± 0.05° |
| Performance / Chú thích từ hãng | 1) See maximum revolution range.; |
| Interfaces / Communication interface | Incremental |
| Interfaces / Communication Interface detail | TTL / RS-422 |
| Interfaces / Number of signal channels | 6-channel |
| Interfaces / Initialization time | 40 ms |
| Interfaces / Output frequency | ≤ 600 kHz |
| Interfaces / Load current | ≤ 30 mA |
| Interfaces / Power consumption | ≤ 0.5 W (without load) |
| Electronics / Connection type | Male connector, M23, 12-pin, radial |
| Electronics / Supply voltage | 10 ... 32 V |
| Electronics / Reference signal, number | 1 |
| Electronics / Reference signal, position | 90°, electric, logically gated with A and B |
| Electronics / Reverse polarity protection | ✔ |
| Electronics / Short-circuit protection of the outputs | ✔ 1) |
| Electronics / Chú thích từ hãng | 1) Short-circuit opposite to another channel or GND permissable for maximum 30 s.; |
| Mechanics / Mechanical design | Solid shaft, face mount flange |
| Mechanics / Shaft diameter | 10 mm; With flat |
| Mechanics / Shaft length | 19 mm |
| Mechanics / Weight | + 0.3 kg |
| Mechanics / Shaft material | Stainless steel |
| Mechanics / Flange material | Aluminum |
| Mechanics / Housing material | Aluminum die cast |
| Mechanics / Start up torque | 0.5 Ncm (+20 °C) |
| Mechanics / Operating torque | 0.3 Ncm (+20 °C) |
| Mechanics / Permissible shaft loading | 80 N (radial); 40 N (axial); |
| Mechanics / Operating speed | ≤ 9,000 min⁻¹ 1) |
| Mechanics / Moment of inertia of the rotor | 6.2 gcm² |
| Mechanics / Angular acceleration | ≤ 500,000 rad/s² |
| Mechanics / Chú thích từ hãng | 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.; |
| Ambient data / EMC | According to EN 61000-6-2 and EN 61000-6-4 |
| Ambient data / Enclosure rating | IP67, Housing side, male connector (IEC 60529) 1) ; IP65, shaft side (IEC 60529); |
| Ambient data / Permissible relative humidity | 90 % (Condensation not permitted) |
| Ambient data / Operating temperature range | –40 °C ... +100 °C 2) ; –30 °C ... +100 °C 3) ; |
| Ambient data / Storage temperature range | –40 °C ... +100 °C, without package |
| Ambient data / Resistance to shocks | 70 g, 6 ms (EN 60068-2-27) |
| Ambient data / Resistance to vibration | 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Ambient data / Chú thích từ hãng | 1) With mating connector fitted.; 2) Stationary position of the cable.; 3) Flexible position of the cable.; |
Item code: DBS36E-S3EK02000
Item code: IMA18-10BE1ZC0K
Item code: WTE280-2P4331
Item code: DBS36E-S3EJ02000
Theo đường đi của khí nén để hiểu tiền điện đến từ đâu, tính thử chi phí và chuẩn bị checklist kiểm tra rò rỉ trong nhà máy.
Chọn ống khí PU/PA theo kích thước, áp suất tại nhiệt độ dùng, bán kính uốn và môi trường. Có bảng đối chiếu và checklist thay ống MRO.
Phân biệt ren G, R, NPT theo hình dạng, tài liệu và cơ chế làm kín. Có ảnh minh họa, quy trình nhận diện và checklist đặt đầu nối.
